 |
 ATIRA-SUNRISE DIGITAL NILOMETER ( DRAW FRAME LOAD GAUGE) |
|
( Measures The Top Roller Load Individually I.E. Left & Right Side )
Atira & Sunrise industries brings digital technology for the first time for universal measurement of draw frames/comber preparatory and comber detaching roller pressure and its uniformity along length of nip |
Main benefits of digital technology : |
Eliminates all limitations associated with dial type mechanical instruments with different scales
User friendly and digital display.
Quick measurement with high accuracy. |
|
| DIGITAL ATIRA NILOMETER SHOWN ABOVE RESEMBLES A TOP ROLLER OF DRAW FRAME |
|
|
| Various end bushes and nylon rollers for different makes of top rollers for draw frames , comber, lap former. |
|
|
|
| It is a compact, portable and easy to use instrument with its suitability on various draw frames as below: |
|
| LR DO2S |
HARA TS 100, LH 10 |
TRUTZSCHLER SHR 900, 1000 |
RSB D30,D35,D40 |
LK 250,LK54 |
| LR DO 6 |
HARA CM 100, CM 400 |
TEXMACO HOWA DFK 2CD |
UNILAP E30,E35 |
TD 03 |
| LR E7/4, E7/5 |
HARA VC 250, VC 300 |
CHERRY 500,600,800,DX7ALT |
RIBBON LAP E4/1 |
LR E7/5A |
| RSB 851, SB2 |
HARA HL 100, SL 100 |
VOUK SH 802E, RD 300 |
SLIVER LAP E2/4 |
ZINSER 720 |
|
|
MAIN FEATURES : |
|
THE INSTRUMENT OPERATES ON 9V RECHARGEABLE BATTERIES.
IT IS PROVIDED WITH SWITCH TO SELECT THE REQUIRED SCALE i.e. DO/6, RSB, Zinser,etc
EASY ZERO SETTING WITH A TOUCH OF BUTTON.
NO MULTIPLIER / CALIBRATION FACTOR REQUIRED, DIRECTLY GIVES READINGS IN kgs.
LOW POWER CONSUMPTION, LONG LASTING BATTERY LIFE.
ONE COMMON INSTRUMENT FOR DRAW FRAMES AND COMBER DETACHING ROLLERS.
ACCURATE READINGS DUE TO ROBUST DESIGN.
|
|
| Drawing is the final stage at which the yarn count CV% can be controlled in addition to strength CV% of yarn by controlling the processes such as Nip setting & Load setting. In these, Load setting is of critical importance since drafting load vary due to reduced cots sizes, mechanical factors such as worn-out journals, end bushes, eccentric bottom rollers, worn out springs and moreover in pneumatic drafting, variations in line pressure, deterioration in pressure exerting hose properties due to its wear results in decrease of Nip Loads of top rollers. It is the comprehensive one catering to all above machines & nip loads upto 100 kgs can be measured. It is must for the spinning department. Your existing NILOMETER can be used on above all machines simply by using appropriate end bushes. For this, just inform us your Nilometer details & machines upon which you intend to use the Nilometer. |
|
ATIRA NILOMETER ( DRAW FRAME LOAD GAUGE ) - LOAD SETTING VALUES IN DRAW BOX TOP ROLLER OF DRAW FRAMES, COMBER , LAP FORMER : |
|
| Name of Machine |
Top Roller End Loads in kg |
| |
1st |
2nd |
3rd |
4th |
| DRAW FRAMES |
| LR DO2, DO2S |
40 |
40 |
40 |
-- |
| LR DO6 |
20 |
20 |
20 |
-- |
| RSB |
32 |
32 |
32 |
- |
| PADMATEX / ZINSER 4/3 & 5/3 |
14 |
26 |
40 |
40 |
| VOUK |
32 |
32 |
32 |
-- |
| HOWA |
10 |
35 |
35 |
35 |
| RIETER D30 (35) |
15 |
30 |
30 |
30 |
| COMBERS |
| LR E7/4 |
30 |
30 |
30 |
-- |
| LK 250 |
30 |
30 |
30 |
-- |
| LAP FORMERS |
| LR SLIVER LAP |
22.5 |
25 |
22.5 |
25 |
| LR RIBBON LAP |
30 |
20 |
20 |
-- |
|
|
| ATIRA NILOMETER - LOAD SETTING VALUES IN DETACHING ROLLERS FOR COMBERS |
|
Machines/Model |
LOAD ( kg ) |
1st |
2nd |
| E 7/4 |
8 |
8 |
| E 7/5,5A,60 |
13 |
14 |
| LK 250 (Old) |
12 |
14 |
| VC 300, 300A |
20 |
17 |
| LK 250 New |
6 |
6 |
|
|
